Controllers and Switchers
46
Xantech Corporation | 13100 Telfair Avenue, Sylmar CA 91342-3573 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
CONTROLLERS AND SWITCHERS
MINI-MACRONIZER™
MAC1 has the ability to send single IR Commands or IR Sequences
when triggered by a single RC68X command.
• Requires Universal Dragon Drop-IR™ for programming
• Eliminates the problem of lost commands from hand held universal remotes
• Cuts down network traffic
• Requires 781ERGPS Power Supply and RC68X IR Programmer
Order: MAC1
UPC#: 4277731181
PROGRAMMABLE CONTROLLER
The 590-10 gives the custom installer the ability to use any push button or contact
closure to initiate infrared commands. The 590-10 incorporates 16 isolated input
circuits and a learning microprocessor. There are 16 pairs of screw terminals on
its rear panel for us with up to 16 individual contact closures.
• Programmable with Universal Dragon Drop-IR™ Programming Software
• Multi-function sequencing for up to 40 commands per
key, button, or contact closure of any type
• Requires 782ERGPS Power Supply
Order: 59010
UPC#: 4277731159
KEYPAD FOR 590
• Eight-button keypad
• Fits in single-gang box
• Requires nine-conductor cable
• Includes legend cutout sheet
• Depth: 0.75” (19mm)
Order: 059800
UPC#: 4277759800
PULSED SWITCHING MODULE
• The 599 is used in conjunction with the 59010 Programmable Controller
• Provides a momentary 12 volt DC pulse output when a steady 5 to 12
volt DC input is applied
• By plugging a 12VDC power supply into a switched AC outlet on the
back of an AM/FM receiver, a low voltage, switched DC signal is made
available to the 59010. This could be used to trigger a power-on command
for a common source component.
• Power is supplied from the 59010
Order: 059900
UPC#: 4277759900
CURRENT SENSOR CONNECTING BLOCK
• Allows the CSM1 Current Sensor to be used as a general purpose
current sensor (independent of the MRC88m)
• For use with CSM1 and Sensor Modules
Order: CBCSM1
UPC#: 4277731190
Speaks Dragon
Speaks Dragon
Comentários a estes Manuais